3200 Low Profile Automatic Pallet Wrapper

PRODUCTION SPEED:

• 1-40 loads per hour

• NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

LOAD CAPACITY:

• Maximum load weight:

• 4,500 lbs dynamic – 12,000 lbs static

• Maximum load size:

• 48” W x 48” L (68” max. load diagonal) x 80” H

• Minimum load size:

• 30” W x 30” L x 24” H

TURNTABLE:

• 68” Diameter laser-cut steel plate with surround deck protection - 3/8” thick

• Maintenance free - 42 wheel support system

• Turntable height 3.344” from floor

• ANSI # 60 direct chain drive c/w chain tensioner

• 3-12 RPM rotational speed c/w soft start acceleration

• Final revolution deceleration and positive stop alignment

• Rugged surround deck for added protection, 3 sided loading and pit mounting

• Front and back forklift ports for easy movement

• Optional loading ramp 65” long x 48” wide available

FILM CARRIAGE ELEVATOR:

• 1/2 HP AC variable speed motor

• ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device

• Maintenance free carriage guidance system

FILM DELIVERY SYSTEM:

• Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage

• Special Film Threading Device

• Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load

• 1/2 HP AC variable speed motor

• Fully electronic dynamic dancer corner compensation

• 33% to 313% fixed stretch capability

• Pre-stretch ratio variable using easy sprocket change

• Carriage Descent Obstruction Safety Shut-Off Device

• Rapid Thread ™ Safety Door with auto power cut-off switch

• Side mounted film carriage for operator convenience and safety

• Superior film-to-roller contact area

• Lifetime warranty on pre-stretch rollers

ELECTRICAL INPUT:

• 115 Volts 1 Phase 60 Hz 15 Amps

PNEUMATIC REQUIREMENT:

• 3 CFM @ 80 PSI clean dry pneumatic supply required

• Filter/regulator c/w gauge & lock-out valve provided

AUTOMATION:

• Pneumatically actuated film clamp mechanism

• Electro-mechanically actuated film tail cut/wiper arm mechanism

• Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle

CONTROL:

• PANASONIC PLC with Touchscreen Operator Interface

• Power Off – On – Reset switch & Power On indicator light

• Single-button Auto Wrap Cycle Start/Pause

• Cycle Pause for applying top sheets

• Reinforce Wrap control for mid-wrapping

• Emergency Stop button

• Turntable Jog button

• Film Carriage Lower & Raise buttons

• Film Clamp Open/Close button

• Film tension (Force-to-Load) control

• Separate film carriage raise & lower speed controls

• Variable turntable speed control

• Triple beam auto load height sensing photo-eye, detects dark or shiny loads

• Separate 1 to 12 revolution top & bottom wrap control

• Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load

• A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program

• Wireless remote start/stop control

• NEMA 12 control panel enclosure

• Non-proprietary UL/CSA approved components

STRUCTURAL:

• All structural steel construction

• Forklift truck portable base structure design

  • lifting tubes included for front and rear access

• Structural steel tube machine tower with sheet metal covers

• Electro-static powder coated paint finish

MISCELLANEOUS OPTIONS:

• Starter Spare Parts Kit – recommended minimum quantity of parts to stock for this specific machine

• Ramp for manual pallet jack loading - 48”W x 65”L

• Additional transmitter for the wireless remote start/stop control (one included with the machine)

• Tower extension for 110” wrap height capability (standard is 80”)

• NOTE: All machines with tower extensions will be hinged and shipped knocked-down

• Dusty Package – Complete sealing of the control panel and use of sealing rings on any conduit entries into the control panel

• Cold Weather Package - down to 32°F

• Broken film/out of film detection c/w automatic machine reset and fault indication

• Lanyard pull switch - mounts to ceiling (in place of standard wireless remote)

• Beacon light with red & green lens – indicates run, clear or fault conditions

LOAD CELL & SCALE PACKAGES:

• LOW PROFILE SCALE PACKAGE - Built-in Load Cells with GSE250 Digital Weight Indicator

• NOTE 1: Reduces maximum load capacity to 4,000LBS

• NOTE 2: If to be used with pallet jacks the OSCBIRMP Scale Ramp option is required

• NOTE 3: Machine with base extension option requires a factory quote

• Heavy Duty Scale Ramp for use with built-in load cells

• Upgrade digital weight indicator from GSE250 model to Matrix 365. The standard model GSE250 indicator is for load weight only and communication features are not available. Matrix 365 indicators have programming features for printers and communication capability

AIR FLOW & PALLET LOCK:

• Pallet Lock Roping Device – the most effective method of securing the load to the pallet. Easily programmed using the standard Microprocessor and touchscreen to apply the roped or normal full web film for additional holding force where needed, air flow if required and to prevent film breakage on sharp product or pallet corners

• Customized Automatic Slitting and/or Roping Devices

• A wide variety of automatic film slitting and or roping devices are available upon request.

BROCHURE

FOOTPRINT

WATCH VIDEO