0
Items : 0
Subtotal : $0.00
View QuoteCheck Out
1-888-209-4344
Distributor Login
0
Items : 0
Subtotal : $0.00
View QuoteCheck Out

The Switch HP-SW (High Profile)

View Flyer
Category:
Description

SPECIFICATIONS

Specification Description
Production Speed
  • 1-35 loads per hour (Single Turntable)
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static
  • Maximum load size to safely clear the tower: 67″ W x 67″ L (96″ load diagonal)
  • Maximum load size to remain inboard of the turntable: 48″ W x 48″ L (68″ load diagonal)
  • Maximum load height: 80″ H (plus up to 4″ top overlap)
Turntable
  • 48″ octagonal 5/16″ thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11″ from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
Film Delivery System
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz 15 Amps

FEATURES

Feature Description
Control Features
  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural Features
  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish

Related products

View DetailsGet Quote

Pilot

The Switch Dual Turntable LP-SW
View DetailsGet Quote

The Switch Dual Turntable LP-SW (Low Profile)

Heavy Duty Turntable Semi-Automatic Stretch Wrap System (Low Profile)
View DetailsGet Quote

LP 2100-SRT (Low Profile)

Stretch Wrapping Machines
View DetailsGet Quote

1100-S (High Profile)