HP 2100-SRT (High Profile)

The 2100SRT is affordable and simple with more standard features than any other pallet wrapper in this price range. A quality machine built with quality components and supported by a local qualified distributor.

View Flyer



Specification Description
Production Speed
  • 1-35 loads per hour (Single Turntable)
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load size to safely clear the tower: 56″ W x 56″ L (79″ load diagonal)
  • Maximum load size to remain inboard of the turntable: 48″ W x 48″ L (68″ load diagonal)
  • Maximum load height: 75″ H (plus up to 4″ top overlap)
  • 48″ octagonal 5/16″ thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11″ from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
Select Options
  • OAFS – Auto Film Start (Includes film holding clip & pendant start/stop station)
  • OBFD – Broken Film/Out of Film Detection c/w Automatic Machine Reset and Fault Indication
  • OCP2 – Cold Weather Package (down to 32ºF)
  • ODP1 – Dusty Package
  • OEB1 – 2 ft. Base Extension for Maximum 95″ Diagonal (Note: 71″ diagonal is standard)
  • OEWH-110-S – Tower Extension for 110″ Wrap Height Capability (Note: Standard is 80″. All machines with tower extensions will be hinged and shipped knocked-down)
  • OPABL – Beacon Light with Red & Green lens – (Indicates run, clear or fault conditions)
  • OPSCLP-SW250 – SCALE PACKAGE (PLATFORM) – SureWeigh Platform Scale with GSE250 Digital Weight Indicator (Notes:
  • OSCRMPP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
  • ORMP-S – Ramp for manual pallet jack loading – 48″ W x 60″ L
  • OPE1-S – 24″ L x 48″ W Porch Extension for Powered Pallet Jacks
  • OPE2-S – 40″ L x 48″ W Porch Extension for Powered Pallet Jacks
  • OSCBI-250 – LOW PROFILE SCALE PACKAGE – Built-in Load Cells with GSE250 Digital Weight Indicator (Notes: SCBIRMP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
  • OSCBIRMP – Heavy Duty Scale Ramp for use with built-in load cells
  • OSCRMPP – Complete 120″L x 48″W Heavy Duty Scale Ramp & Porch for use with platform scales
  • OSSPK – Starter Spare Parts Kit
Film Carriage Elevator
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
Film Delivery System
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz 15 Amps


Feature Description
Control Features
  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural Features
  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish
Cousins Packaging is currently open for business and fully stocked. We are also well positioned to meet the anticipated demand of our loyal customers when the economy is back up and running.View Our Machines