1100-S (High Profile)

Description

SPECIFICATIONS

Specification	Description
Production Speed	1-30 loads per hour (Single Turntable) NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity	Maximum load weight: 4,000 lbs dynamic – 10,000 lbs static Maximum load size: 56″ W x 56″ L (79″ max. load diagonal) x 75″ H (plus up to 4″ top overlap)
Turntable	48″ octagonal 5/16″ thick formed steel plate turntable 4 point caster support system Turntable height less than 11″ from floor ANSI # 50 direct chain drive c/w chain tensioner 3-12 RPM rotational speed c/w soft start acceleration 1/2 HP AC variable speed motor Final revolution deceleration and positive stop alignment Front and back forklift ports for easy movement Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator	1/2 HP AC variable speed motor ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device Maintenance free carriage guidance system
Film Delivery System	Stretch roller with manually adjusted caliper brake web tensioning system Standard 20” roll width, 10” diameter Carriage Descent Obstruction Safety Shut-Off Device Side mounted film carriage for operator convenience and safety
Film Capacity	Accepts all commercial films wound on 3″ diameter cores x 20″ width Accommodates damaged cores
Electrical Input Requirements	115 Volts 1 Phase 60 Hz 10 Amps

Feature	Description
Control Features	Electronic controls with LCD operator interface Power Off – On – Reset switch & Power On indicator light Single button Auto Wrap Cycle Start/Pause Cycle Pause for applying top sheets Reinforce Wrap control for mid-wrapping Base or Top Wraps First program Up Only or Up/Down wrap program Emergency Stop button Turntable Jog button Film Carriage Lower & Raise buttons Separate film carriage raise & lower speed controls Operator programmable turntable speed control Triple beam automatic load height detection sensor for dark or shiny loads Separate 1 to 12 revolution top & bottom wrap control A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural Features	All structural steel construction Forklift truck portable base structure design – lifting tubes included for front and rear access Structural steel tube machine tower with sheet metal covers Electro-static powder coated paint finish

Feature

Description

Control Features

Electronic controls with LCD operator interface
Power Off – On – Reset switch & Power On indicator light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Reinforce Wrap control for mid-wrapping
Base or Top Wraps First program
Up Only or Up/Down wrap program
Emergency Stop button
Turntable Jog button
Film Carriage Lower & Raise buttons
Separate film carriage raise & lower speed controls
Operator programmable turntable speed control
Triple beam automatic load height detection sensor for dark or shiny loads
Separate 1 to 12 revolution top & bottom wrap control
A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program

Structural Features

All structural steel construction
Forklift truck portable base structure design – lifting tubes included for front and rear access
Structural steel tube machine tower with sheet metal covers
Electro-static powder coated paint finish