1-888-209-4344 Mon - Fri 09:00 - 17:00 6450 Northam Dr, Mississauga, ON L4V 1H9
1-888-209-4344 Mon - Fri 09:00 - 17:00 6450 Northam Dr, Mississauga, ON L4V 1H9
Distributor Login
Automatic Stretch Wrap System

3300-CTA Conveyorized Automatic

A unique patented fully automatic stretch wrapper that can be operated from the forklift with a wireless remote. Eliminates the need for the operator getting off and on the lift to attach and cut the film. Provides a huge labor cost savings while eliminating safety concerns.

View Flyer
Category:
Description

 

SPECIFICATIONS

Specification Description
Production Speed
  • 1-40 loads per hour
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load weight: 4,000 lbs dynamic – 12,000 lbs static
  • Maximum load size: 48″ W x 48″ L (68″ max. load diagonal) x 75″ H (plus up to 4″ top overlap)
  • Minimum load size: 30″ W x 30″ L x 24″ H
Turntable
  • 72″ diameter 3/8″ thick laser-cut steel plate with 5″ skirt
  • Front and side cut-outs with UHMW flexible contouring for fork truck access
  • 6-point heavy duty ball bearing caster support system
  • ANSI # 60 direct chain drive c/w chain tensioner
  • 3-16 RPM rotational speed c/w soft start acceleration
  • 3/4 HP AC variable speed motor c/w turntable holding brake
  • Final revolution deceleration and positive stop alignment
Film Carriage Elevator
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
Film Delivery System
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
Power Roller Conveyer
  • Basic system includes: 72″ dia. powered Process/Turntable section & 5 ft. Gravity Outfeed section
  • Turntable section includes:
    • Chain driven live roller type conveyor
    • Rated 4,000 lbs per section
    • 2-1/2″ diameter 11 gauge rollers c/w 11/16″ hex axles on 3″ centers
    • ANSI # 40 roller to roller chain drive
    • 50″ effective roller width
    • Conveyor speed variable up to 30 FPM with electronic soft start
    • Pass-line height – 16-1/2″ from floor to top of rollers
    • 1/2 HP AC variable speed motor
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz  20 Amps

FEATURES

Feature Description
Automation Features
  • “All Electric – No Pneumatics Required”
  • Electro-mechanically actuated film clamp mechanism
  • Electro-mechanically actuated film tail cut/wipe arm mechanism
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
Control Features
  • PANASONIC PLC with Touchscreen Operator Interface
  • Power Off – On – Reset switch & Power On Indicator light
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Clamp Open/Close button
  • Eject Load (Turntable Conveyor Jog) button
  • Film Tension (Force-to-Load) Control
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
  • Separate film carriage raise & lower speed controls
  • Variable turntable speed control
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Gravity conveyor full photo-eye
  • Broken film/out of film detection c/w automatic machine reset
  • Beacon light indicates run, clear or fault conditions
  • Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available
  • NEMA 12 control panel enclosure
  • Non-proprietary UL/CSA approved components
Structural Features
  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish

Related products

Conveyorized Automatic Stretch Wrap System (45 Loads/hr)
View DetailsGet Quote

6100-CTA Conveyorized Automatic

Automatic Stretch Wrap System (High Profile)
View DetailsGet Quote

HP 3200 Platform Automatic (High Profile)

Heavy Duty Conveyorized Automatic Stretch Wrap System
View DetailsGet Quote

3300-A Conveyorized A-Arm Automatic

View DetailsGet Quote

LP-SWA A-ARM Platform Automatic (Low Profile)