1-888-209-4344 Mon - Fri 09:00 - 17:00 6450 Northam Dr, Mississauga, ON L4V 1H9
1-888-209-4344 Mon - Fri 09:00 - 17:00 6450 Northam Dr, Mississauga, ON L4V 1H9

Model 4100 Titan FSU (Free-Standing ‘U’ Post)

Description

SPECIFICATIONS

Specification Description
Production Speed
  • 1-30 loads per hour
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load weight: Unlimited (floor supported)
  • Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 86″ H (plus up to 4″ top overlap)
Rotary Arm
  • Double flange bearing support system
  • Twin V-belt drive pulleys with belt tensioner
  • 1-12 RPM rotational speed c/w soft start acceleration
  • Final revolution deceleration and positive stop alignment
  • 1/2 HP DC variable speed motor
Film Carriage Elevator
  • 1/2 HP DC variable speed motor
  • Direct flat belt drive system
  • Maintenance free 12 point carriage guidance system
Film Delivery System
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP DC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33 to 313% fixed stretch capability
  • Pre-stretch ratio variable by easy sprocket change
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz 15 Amps

FEATURES

Feature Description
Control Features
  • Simple to operate
  • PANASONIC PLC
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Base or Top Wraps First program
  • Reinforce Wrap control for mid-wrapping
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Rotary Arm Jog switch
  • Film Carriage Lower/Raise switch
  • Film tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Variable rotary arm speed control
  • Rotary arm and carriage elevator dynamic braking system
  • Triple beam type auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 9 revolution top & bottom wrap control
  • NEMA 12 control panel enclosure
  • Dust tight slip ring assembly
  • Non-proprietary UL/CSA approved components
Structural Features
  • All structural steel construction
  • Integral structural steel wall/floor mounting stand
  • Electro-static powder coated paint finish
Safety Features
  • Rotary Arm Obstruction Emergency Safety Stop Sensor

 

Bitnami